With a large and easy-to-read display. Its polyethylene protection foam wakes it comfortable to hold.

Ideal to discover wind forces. Instant, maximum and average windspeed on the display

Anemometer with max speed reach.

A Clever First Step into Meteorology !

Wind speed and temperature meter, including a calculation mode of the wind-chill factor (temperature felt when the wind is blowing). Used by fire fighters, farmers, scientists, etc.

Anemometer-thermometer with max speed reach and windchill factor.

Anemometer-thermometer- electronical compass  with max speed rech and  windchill factor.

This device can measure the air temperature and humidity in the bales of forage, straw, Andean and others, but can also be used in air, vegetation and granular materials (cereals). CAUTION: Do not measure the grain moisture but the air contained between them.
The aircraft is equipped with a probe extremely resistant stainless steel with a plastic sleeve and an ergonomic stainless steel tip. Can not be used in a liquid.

CENTER 342

The CENTER 342 is a rugged temperatures with a memory of 32,000 points backup. It has a backlight for the dark zone. The data transmission is made via infrared. It is perfect for controlling the storage of certain products susceptible to moisture.

The SKYWATCH ATMOS is designed specifically for the agricultural and scientific markets. Wind speed, temperature, and relative humidity are measured. Windchill and dewpoint are calculated on the ATMOS. This unit is by far the best device for measuring windspeed, temperature, and humidity. It is simple to use, accurate, and dependable. The hygrometer never needs calibration, maintaining its high accuracy over the life of the product.

Skywatch AWS offers three functions : it measures, displays and warns ther user both visually and audibly of air speed (W), temperature (T) and humidity (H).

Minimum and maximum values for temperature and humidity can be adjusted individually. Air (wind) speed can measured on two levels (Hi & Lo). The control unit, which operates independently from the sensors, is designed for multiple applications.

The SKYWATCH® GEOS N°11 is a high performance professional instrument benefiting from our 25 years of experience in developing measuring devices. It uses only industry quality components and pressure, windspeed, humidity and temperature sensors that are made in Switzerland.

The SKYWATCH® GEOS N°11 is specially designed for intensive use in harsh environments.

Anemo-thermo-barometer-electronical compass  with max speed rech and  windchill factor, altitude and pressure tendencies

SKYWATCH® N.E.W.S. is an autonomous meteorological station designed for monitoring the atmospheric conditions at a site.It automatically and periodically transmits its measurements via GPRS.

SKYWATCH® AERO is a meteorological station developped for studies of the atmospheric conditions of a site.

SalinoMADD

The SalinoMADD was developped for professionals who measure frequently stream flow. It can store upto 15 measuring sites.

EasyFlow

Simplified version of the SalinoMADD, the EasyFlow is adapted for professionals who occasionally do flow gauging in several minutes and who do not need to record several measuring sites.

This competitively priced instrument (flowmeter - thermometer) has been developed for use under challenging circumstances. Because of its different impellers, you can use it to measure amost any liquid or gaseous medium.

POROSIMETER MK1

This easy-to-use, reliable and very precise porosimeter was developed and manufactured by JDC ELECTRONIC SA, following a high demand from the free flight lovers, mainly for security. Very quickly this instrument became the reference in matter of porosity measurement and is now used and appreciated world wide.

CENTER 300-301-302-303

This series of thermal couple thermometers are micro controller based testers. With very intuitive interface, the user can fully operate the tester without second thougt. Some of the units (302 & 303) are digitally calibrated for long time stability. The whole series are equipped.

CENTER 304-309

In some applications, the temperature is concerned at more than two locations. This is why we provide the four channel model thermometer 304 and 309. Ther operation interface is intuitive and all the temperature data are shown on the LCD at the same time so that no extra step for the user to get the reading.

CENTER 305-306

These dataloggers are designed for advanced applications which require the temperature data for a period. With Center 305 or 306, the user can collect the information very easily. The operating interface is designed in a very intuitive way so that the user can locate the function by just look at the panel. The build in real time clock will give every set of recording data a time stamp so that every data can be traced back to the time it occured. The bundled window software is not only used to read the recording dat but it provides a virtual panel in the window to fully control the tester.

CENTER 307-308

Center 307/308 thermometers are compact size low cost units. It will fulfill the need for most of every day applications. Even though this seems to be an entry level unit, the measuring range is till as wide as the sensor can provide with sufficient accuracy for applications.

CENTER 340

CENTER 340 is a temperature data logger. Even though this unit is focus on data collecting. We had place a LCD display the operator on site information. In case of dark environment, it even equipped with back light display. The unit had built in a real time clock inside so that the events are captured with time stamps. The recording memory can hold 64,000 records which can produce high resolution test result.

CENTER 350

Infrared Thermometers. Easy to use, thanks to its form of gun and his laser sights, providing a precise measurement. Display ° C (degrees Celsius) or ° F (Fahrenheit). The ratio of CENTER 350 is 8:01 and the 352 in 12:01.

CENTER 358

Center 358 is a pocket size low cost infrared thermometer. Target indication is through LED which will make it available for some of the laser restriciton countries. Temperature scale can also be set through switch.

CENTER 310-311

Center 310 is our standard series humidity temperature meter. By applying high performance sensor, these testers have rapid response and long time stability.

Center 311 had also included a thermal couple input that can use normal thermal couple probes.

CENTER 313-314

Center 313/314 are data loggers enhanced from 310/311. We had built memory for 16 000 records in these testers. The sampling period is programmable and there is a real time clock in the tester. The window based software come with each unit is very easy to operate. The users only have to connect the cable and call the program and no extra setup is needed.

CENTER 315

Center 315 is our entry level humidity tester. Even though the price is lower, only minor performance is affected.

CENTER 320

Our standard sound level meter CENTER 320 has a wide dynamic range from 30 to 130 dB. It has different frequency weighting A and C to respond to human sense or machine monitoring purposes. For different sound pattern, it also supplies Fast and Slow time constant setting. Analog output is also provided for other use.

CENTER 321

CENTER 321 is our newly designed sound level meter. With all the functions 320 can provide, we had changed something in new designed back light LCD. We had added fast analog bar with peak hold two second in this tester. An auto range function is added for the tester to choose one proper range for measuring by the tester itself. RS232 interface is also added to provide real time data to the computer.

CENTER 322

If one needs long time on site sound monitoring, CENTER 322 will be the choice. With its build in 32'000 records deep memory, it can gather all the data you need just by this tester and a tripod. After the data is collected, the user can download the data to the computer at his convenient place.

CENTER 325

CENTER 325 is our entry level sound level meter. We have tried to keep as much as possible and on the same time reduce the system complexity as much as possible. 325 is the result.